IMPORTANT PRE-INSTALLATION NOTICE:

Before commencing the installation process, we strongly urge users to check the local laws thoroughly review this installation procedure and assess the time, knowledge, and resources needed to successfully complete it. PLEASE ALSO REVIEW THE DISCLAIMER AT THE END OF THIS INSTALLATION GUIDE.

While GLOSHOPfx’s kit offers a relatively straightforward connection, a fundamental understanding of the car's electrical system and a certain level of physical fitness are prerequisites.

It is highly recommended that the installation should be completed in one continuous session, as driving the car with an incomplete installation is not advisable. You may take short breaks if needed, but DO NOT OPERATE THE VEHICLE WITH AN UNFINISHED INSTALLATION. We recommend ensuring that all necessary components and tools are readily available before embarking on the installation journey.

Typically, the entire installation process may span from 3 to 6 hours or it may even take longer, depending on the car's make and model and the user's level of knowledge and expertise. If you choose not to undertake the kit installation by yourself, we recommend seeking the assistance of a professional service provider. The Edifier Inc. team, based in Toronto West, boasts extensive experience in installing similar kits and is more than willing to assist you in installing your underglow kit promptly and affordably. Please call them at (416) 766-2626 for appointment.

DOWNLOAD THE INSTALLATION GUIDE

18 lights Package contents:
  • 110cm Door LED strips x4
  • 125cm Dashboard LED strip x1
  • 40cm Dashboard LED strip x1
  • Main Bluetooth Controller x1
  • Sub Bluetooth Controllers x4
  • Door handle lights x4
  • Door cup holder lights x4
  • Footwell lights x4
  • Wireless Remote controller x1
  • Main power cord with fuse x1
  • On/OFF power switch cord x1
  • Y cable for dashboard controller x1
  • Door controller power cords x4
  • Footwell lights adhesive cutouts x4

2. Test the Lights Before Installation

Before installing the kit in your vehicle:

Important:

  • Do not accept the package if it appears damaged or tampered with.
  • While opening the package, carefully inspect all components for any signs of damage or mishandling.
  • If you find any parts missing, damaged, or incorrect, contact the sender immediately for assistance.
  • If everything in the package appears to be in proper condition, connect each LED strip and other lights to their designated ports on the controllers.
  • Supply power to the controllers using an external power source.
  • Verify that all lights and controllers are functioning properly.

Pro Tip: To simplify testing, you can keep all the controllers positioned close to one another. This pre-installation test helps identify any issues and saves time during installation. While we rigorously test each kit before shipping, unforeseen damage during transit can occur.

3. Prepare the Car Interior

Every car model is different, so removing panels and accessing slots will vary. Please refer to your vehicle’s official guides. However, it is important to understand that you only use plastic or other soft materials prying tools to remove the dashboard, doors and other panels without damaging them. Avoid metal tools to prevent scratches or marks.

4. Install the Main Controller

Choose a suitable location to mount the main controller, such as:

  • Under the dashboard or
  • Inside the center console.

Secure it firmly to ensure it stays in place during vehicle movement.

5. Install Dashboard LED Strips

  • Remove the required dashboard panels.
  • Identify suitable slots to slide in the LED strips:
  • Ensure the white acrylic rounded side faces outward for optimal illumination.
  • The black side should be hidden inside the slot.
  • Securely hide cables to maintain a neat appearance.

Pro Tip: The dashboard strips include:

  • A 125cm strip for the passenger side.
  • A 40cm strip for the driver’s side.
  • Use the provided Y connector to connect both strips to a single port on the main controller.

6. Power the Main Controller

  • Connect the main controller to a +12V accessory power source, preferably from the fuse box.
  • Using accessory power ensures the lights turn off automatically when the vehicle is switched off, preventing accidental battery drainage.

Pro Tip: The kit includes a manual ON/OFF power button for added convenience, but its use is optional. The system automatically powers off when the car is switched off, provided the power was taken from the accessories power. Additionally, you can use the remote control or mobile app to turn the lights ON or OFF as needed.

7. Install Footwell Lights

  • Connect the footwell lights to the main controller before sticking them in place.
  • This ensures the cable length is adequate for proper placement.
  • Install the lights in the desired position in the footwell area.

8. Installing Door lights

  • Remove the interior door panels.
  • Locate a slot to slide in the 110cm door LED strips.
  • If the slot is shorter than the strip, cut the LED strip to the desired length.
  • Important: Ensure the LED strip is powered OFF while cutting to avoid damage to the strip, controller, or vehicle’s fuse box.
  • Connect the door LED strip to the door controller and secure the controller inside the door panel using adhesive or zip ties.
  • Connect the controller’s power cable with the power from the connectors available somewhere in the door panel.

9. Install Door Handle and Cup Holder Lights

  • Mark and drill suitable holes in the door panels for the door handle and cup holder lights.
  • Use appropriate drill bits to ensure a precise fit.
  • Connect these lights to the corresponding ports on the door controller.

10. Final Checks

  • Double-check all connections and cable management to ensure a tidy and professional installation.
  • Check each LED strip and accessory to confirm proper operation.

11. Connect and Test the System

  • Once all components are installed, turn on the system using the ON/OFF switch, wireless remote, or mobile app.
  • The mobile app will automatically detect the main controller if powered ON.
  • Use the app to:
  • Select colors.
  • Adjust brightness.
  • Choose from 200+ lighting patterns.

Pro Tip: Scan the QR code provided in the manual to download the mobile app for easy control.

Safety Tips

Always work in a clean, well-lit area to prevent accidental damage.

Disconnect the car battery before installation if you’re unfamiliar with automotive wiring.

Avoid over-tightening screws or applying excessive force to panels.

Enjoy Your GLOSHOPfx GLIO Ambient Light Kit!

With the installation complete, it’s time to enjoy the vibrant, customizable ambiance your new lighting system brings to your car. Whether you’re commuting or cruising, GLOSHOPfx GLIO adds a luxurious touch that will impress every passenger. For assistance, troubleshooting, or additional customization ideas, contact our support team—we’re here to help!

Troubleshooting/FAQs:

  • Extended length options for comprehensive coverage
  • Professional-grade materials for durability
  • Easy installation with included mounting hardware
  • High-intensity LEDs for maximum visibility
  • Even light distribution across entire length
  • Advanced heat management for consistent performance
  • Cut-to-length capability for custom installations
  • Modular design for flexible configurations
  • Perfect fit for any vehicle size or type
  • Over 200 lighting patterns, including flowing, pulsing, and strobe effects.
  • 16.7 million color combinations for endless customization.
  • Advanced Flow-Control Patterns create eye-catching ambient effects.
  • Plug-and-play setup with detailed instructions
  • Universal mounting brackets included
  • No special tools or expertise required
  • Compatible with most vehicle makes and models
  • Standard 12V DC power connection
  • Works with existing electrical systems
  • Smartphone app for complete control
  • Physical remote control included
  • Voice control compatibility with smart assistants

Disclaimer

The installation instructions provided in this guide are intended to assist users in the installation of the GLOSHOPfx GLIO Ambient Light Kit. While every effort has been made to ensure the accuracy and completeness of this guide, GLOSHOPfx, its suppliers, owners, employees, and affiliates assume no responsibility for any errors, omissions, shortcomings, or missing information that may be present.

Important Points to Consider:

  • Installation of the GLOSHOPfx products is undertaken at the sole discretion and risk of the user.
  • Users are fully responsible for ensuring proper installation and compliance with their vehicle manufacturer's guidelines, as well as any applicable laws or regulations.
  • GLOSHOPfx is not liable for any damages, malfunctions, or injuries resulting from the installation, misuse, or failure to follow these instructions. This includes, but is not limited to:
  • Damage to the vehicle or its electrical system.
  • Loss of functionality of vehicle components.
  • Personal injury or harm.
  • Any issues arising from installation or use of the product remain the sole responsibility of the vehicle owner.

Professional Installation Recommended:

If you are unfamiliar with automotive electrical systems or vehicle interior components, we strongly recommend seeking professional assistance to ensure safe and proper installation. You can find certified installers near your area by visiting our website: www.gloshopfx.com

By using any of the GLOSHOPfx products, you acknowledge and agree to these terms. It is your responsibility to ensure the proper handling, installation, and use of this product.

Thank you for choosing GLOSHOPfx—we appreciate your understanding and support!